Continuous Liner Bags & Bagging Systems FAQ

A continuous liner bag is a long tubular plastic film supplied on a roll. The liner can be filled and separated into individual sections as needed, depending on the equipment and sealing method.

A roll of liner is installed in a compatible bagging system or dispenser. After a section is filled, it can be closed and separated using the appropriate method. The remaining liner is then available for subsequent use.

JENTON manufactures continuous liner bags and related bagging systems and dispensers. Product selection depends on the application, equipment and customer specification.

View Bagging Systems & Dispensers →

Color options can be discussed according to the intended application, identification requirements and production specification. Please provide your preferred color when requesting a quotation.

JENTON continuous liner bags use a three-layer co-extruded polyethylene (PE) film structure. Material selection depends on the intended application, required performance and customer specification.

JENTON offers three material routes for discussion:

Standard PE: for suitable general waste collection and industrial applications.

Biodegradable material: for applications where biodegradability is a requirement, subject to the exact material specification and applicable conditions.

PE containing 40% recycled material: for customers seeking a specified recycled-content option.

The precise formulation and suitability should be confirmed for each product before ordering.

Three-layer co-extrusion allows different film layers to be designed as part of one structure. The appropriate construction can be selected according to the intended application and required film properties. Actual performance depends on the material formulation and finished product.

No. Suitability depends on the exact material, intended disposal environment, operating conditions and applicable regulations. Biodegradable products should not be assumed to degrade under every environmental condition. Please confirm the required specification before ordering.

This option refers to a PE film specification containing 40% recycled material. The applicable recycled-content basis, material source and supporting documentation should be confirmed for the specific product and order.

JENTON continuous liner bags can be customized for suitable applications including:

1. General waste collection.

2. Sealing and containing waste from wastewater treatment.

3. Industrial vacuum and dust collection.

4. Food packaging applications.

5. Medical and healthcare waste containment.

Material selection and regulatory requirements must be confirmed for the intended use.

Yes. Suitable continuous liners can be specified for general waste collection. Diameter, length, thickness and packaging can be selected according to the waste type and collection equipment.

Continuous liners can be evaluated for sealing and containing suitable waste generated during wastewater treatment. The correct specification depends on moisture content, waste characteristics, equipment and handling conditions.

Explore Wastewater Treatment Bagging Systems →

JENTON can evaluate liner requirements for suitable industrial vacuum and dust collection equipment. Compatibility depends on the equipment dimensions, collected material, filling conditions and required liner performance.

JENTON can discuss liner solutions for suitable food packaging applications. Food-contact suitability, material documentation and applicable requirements must be confirmed for the specific product and destination market before use.

JENTON can evaluate customized liners for suitable healthcare and medical waste containment applications. The required material, closure method and performance depend on the waste classification and applicable local regulations. Do not assume that a general-purpose liner is suitable for infectious or hazardous waste.

Yes. JENTON can evaluate customized continuous liner production according to the agreed product specification. Customization options include material, length, film thickness, diameter, packaging, identification, logo and printed graphics.

Send your specifications to JENTON →

Yes. These dimensions can be discussed according to equipment requirements, application conditions and production feasibility. Please provide your required measurements or an existing liner sample.

Packaging format, labels and product identification can be discussed according to order requirements. Final options depend on the product, artwork, quantity and packaging specification.

Customized logos and printed graphics can be evaluated for suitable products. Please provide your artwork, preferred layout, packaging requirements and estimated order quantity for review.

Please provide the intended application, material preference, diameter, length, thickness, quantity, packaging method and any identification or printing requirements. Equipment drawings, photographs or an existing liner sample can help clarify the specification.

Check the required liner diameter, length, thickness, installation method and the characteristics of the collected material. Equipment drawings, dimensions or a sample of the existing liner can help JENTON evaluate a suitable specification.

JENTON can evaluate replacement requirements using existing liner samples, measurements, drawings or equipment information. Compatibility should be confirmed before placing a production order.

Yes. An existing sample can help clarify dimensions, film construction and other physical characteristics. Please contact JENTON to discuss the sample and required replacement specification.

JENTON can discuss OEM manufacturing according to the required material, dimensions, packaging and branding specification. Project feasibility, minimum order quantity and production schedule should be confirmed for each inquiry.

Private-label production can be discussed for suitable projects. Customers should provide their logo, artwork, packaging requirements, product specifications and estimated order volume.

Yes. Equipment manufacturers can share drawings, dimensions, installation requirements and the intended application for technical evaluation. The final liner specification should be agreed before mass production.

Thickness selection depends on the collected material, filling method, liner dimensions and required mechanical performance. A suitable specification should be evaluated against the actual application rather than selecting thickness alone.

Available documentation should be confirmed for the specific product and material specification. If you require test reports, material declarations or other documents, please state these requirements when requesting a quotation.

No. Suitability depends on the exact material, construction, intended use and applicable regulations. Food-contact and healthcare waste applications may require specific documentation or performance requirements. These must be confirmed for the product concerned.

Sample availability depends on the product specification and application. Contact JENTON with your requirements so that sample options and any applicable costs can be confirmed.

MOQ depends on the material, dimensions, printing, packaging and whether the product is standard or customized. Please provide your required specification and estimated quantity so JENTON can evaluate the order.

Please provide the application, material, diameter, length, thickness, quantity, packaging and printing requirements, together with the destination country. Photos, drawings or an existing liner sample are helpful for customized products.

Request a quotation →

Lead time depends on the product specification, order quantity, customization and production schedule. The confirmed lead time will be provided during quotation and order confirmation.

Shipping arrangements can be discussed according to the destination, order size, packaging and agreed delivery terms. Please provide your destination country when requesting a quotation.